Description
2 in 1 meter for checking pH as well as the levels of moisture in your soil. It provides the vital information required to custom treat the soil to the crop.
Instructions & optimum pH level guide included.
Analogue dial so no batteries are required.
How To Use
Remove stones, leaves and twigs from the surface of the soil
Loosen the soil with a trowel to a depth of 10 – 15cm
Wet the soil with water (preferably rainwater) to a muddy consistency
Lightly clean the pH probe but not the tip using an abrasive material/scourer (not included)
Wipe away any powdery deposits with a paper tissue
Push the probe vertically into the soil to a depth of 10 – 15cm
Take a reading after 60 seconds
Remove, clean and prepare probe as previously described. Repeat above by inserting the probe into a different but adjacent point to check the first reading
Taking a Moisture Reading
Push the probe vertically into the compost mid-way between the plant and the edge of the pot. A reading can be taken immediately.
